Frequency Section | |
FrequencyRange | 50KHz to 3.3GHz |
Center Frequency | |
Setting Resolution | 100KHz,Allows rotary encoder,numeric keys and function keys |
| (up and down) for setting CF. |
Accuracy | < +(30+100T)KHz @ 200KHz to 10MHz span |
| < +(100+700T)KHz @ 20KHz to 3.3GHz span |
| at 23℃(+5℃), t=sweep time(s) |
Frequency Span | |
SettingRange | 0Hz (zero span), 200KHz to 2GHz(1-2-5 steps) and 3.3GHz(full span) |
Accuracy | less than + 3% @ 23℃(+5℃) |
Resolution Bandwidth | 3dB bandwidth |
SettingRange | 3KHz to 3MHz (1-3 step) and AUTO |
Accuracy | less than +20% |
Selectivity | 1:12 (nominal) @ 3dB:60dB |
Video Bandwidth | 100Hz to 300KHz (1-3 step), OFF and AUTO |
SSB Phase Noise | -90dBc/Hz (typical) @ 100KHz offset |
Spurious Response | less than -60dBc |
Amplitude Selection | |
Reference Level | |
SettingRange | +10 to -40dBm in 1dB step |
Accuracy | less than +0.8dB @ RBW:3MHz, VBW:OFF,ATT:0dB,23℃(+5℃) |
Unit | dBm,dBV,dBmV,dBmv |
Average Noise Level | -110dBm (typical)@ RBW:3KHz, VBW:100Hz |
Input Impedance | 50W |
Input VSWR | less than 2.0 |
Input Attenuator | |
Operating Range | 0 to 25dB @ 1dB step coupled with reference level |
Switching Error | less than +0.6dB |
RBW Switching Error | less than +0.6dB |
Display Scale | |
Scale | 10dB/div,2dB/div |
Accuracy | less than +0.8dB/10dB |
| less than +0.2dB/2dB |
| less than +1.6dB/70dB |
Input Damage Level | +23dBm (CW average power),25VDC |
Input Connector | SMA(J) |
Sweep Section | |
Sweep Time | |
SettingRange | 10ms to 30s (1-3 step) and AUTO |
Accuracy | less than +0.1% (less than +1.5% @ full span) |
Trigger Mode | AUTO @ zero span |
Detection Mode | Positive peak, Negative peak, sample |
