当前位置：采购仪器设备 > Anritsu(安立) > 功率分析

Anritsu ML4803A 功率计 最近更新日期：2004-12-03 厂商名称： Anritsu(安立) 商品名称： 功率计 商品型号： ML4803A 简单信息：  我要留言  同类商品比较  打印页 特点 ·可以显示绝对值（单位W或dBm）、相对值（单位dB或%），在绝对值模式测量回损时还可以显示VSWR； ·传感器灵敏度自动校正。 ·可操作性好，测试效率高，具有设置存储功能； ·供电方式包括：交流、直流和电池； ·超宽范围的同轴类非定型传感器； ·超宽带宽：100kHz 至 32GHz； ·宽动态范围：-30 至+20dBm； ·低VSWR，高响应速度； ·75Ω功率传感器。 ·能够测量准毫米波、毫米波。 技术指标 Frequency range 100kHz to 90GHz Sensor Coaxial types For high level:MA4701A,MA4703A,MA4705A,MA4601A,MA4603A For low level:MA4702A,MA4704A,MA4602A,MA4604A For quasi-millimeter and millimeter waves MP737A,MP738A,MP712A[],MP713A[](used withMA4002A Adapter) MP714A[],MP715A[],MP716A[],MP717A[],(used with MA4002B Adapter) Display W,dBm,or dB(REL)can be selected.4-digitdigital display(20%over range is equipped) Compact analog indicator is built-in(values cannot be used) Calibration coefficient,offset value,andreference level setting Calibration coeffcient:0to10dB (accuracy:0.01dB) Offset value:0to±99.99dB(accuracy:0.01dB) Reference level:-99.99to +99.99dBm(accuracy:0.01dB) Power range MA4701A/4703A/4705A/4601A/4603A full-scalevalues:-20,-10,0,+10,+20dBm(10μWto 100mW) MA4702A/4704A/4602A/4604Afull-scale values:-60,-50,-40,30,-20dBm(1nW to10μW) MP series sensors full-scale values:-20,-10,-0,+10,+20dBm(10μ to 100mW) Range switching Automatic or manual(range hold)can be selected. When manual is selected,an arbitrary range can be set unrelated to inputlevles. Range display Selected range(when range is held)is displayedonrange lamps 1to 5. An under range or over range is also displayed. Accuracy Accuracy (at indicator) WATT moed:±0.5%,dBm mode:±0.02dBm,dB(REL)mode:±0.02dB Zero adjustment Automatically performed by pressing push-buttonkey Zero setting MA series sensors:±0.5%of full scale(typicalvalue)at the highest sensitivity range(range1) MP series sensors:±1.0%of full scale(typical value)at the highest sensitivityrange(range1) Zero shift between each range MA series sensors:±0.2%of full scale afterzero set at the highest sensitivity range PM series sensors ±0.8%of full scale:Range2 after zero set at the highest sensitivity range ±0.5%of full scale:Range3 to 5 after zero set at the highest sensitivityrange Calibration oscillator 50MHz calibration oscillator is built in.Outputconnector:N(J) Output impedance:1.00mW(0dBm) Accuracy:Set to within 0.7%at factory(NIST traceable)±1.2%worst case forone year Averaging 4sample rates can be selected RF blanking output Low-level TTL(0to +0.25V)in zero set mode High-levelTTL(5±0.25V)when zero set mode is cancelled Recorder output DC uoltage proportional to indicated valueis output(1V in full-scale display). Output impedance:1kΩ,Output connector:BNC Remote-control GPIB is standard. Front panel functions other than the power switch can be controlled externally. SH1,AH1,T5,L4,SR1,RL1,PP0,DC1,DT0,C0 Memory function Up to 30 frequencies,calibration coefficient,offsetvalue,and reference level data combinations can be stored. Power supply AC power supply 100V+10%-15%,50/60Hz,<20VA DC power supply +7to +12V,≤13VA External battery pack Continuous operation with MZ5003ABattery Pack:5hours Operating temperature 0°to 50℃ Dimensions and mass 213(W)×88(H)×250(D)mm,≤3kg EMC*1 EN55011:1991,Group1,ClassA EN50082-1:1992 Safety EN61010-1:1993(Installation CategoryII,PolutionDegreeII) ·同轴功率传感器 ·非品质功率传感器 Model MA4701A MA4703A MA4705A MA4601A MA4603A Frequency range 10MHz to 18GHz 50MHz to 26.5GHz 50MHz to 32GHz 100kHz to 5.5GHz 100kHz to GHz Nominal impedance 50Ω 75Ω Maximum VSWR 1.4(10to 30MHz) 1.18(30to 50MHz) 1.1(50MHz to 2GHz) 1.18(2to 12.4GHz) 1.28(12.4 to 18GHz) 1.15(50to 100MHz) 1.10(0.1to 2GHz) 1.15(2to 12.4GHz) 1.20(12.4 to 18GHz) 1.25(18to 26.5GHz) 1.15(50 to 100MHz) 1.10(0.1 to 2GHz) 1.15(2 to 12.4GHz) 1.20(12.4 to 18GHz) 1.25(18 to 26.5GHz) 1.50(26.5 to 32GHz) 1.3(100 to 300kHz) 1.2(0.3 to 1MHz) 1.1(1MHz to 4GHz) 1.2(4 to 5.5GHz) 1.4(100 to 300kHz) 1.15(300 kHz to 2GHz) Measured power range -30to +20dBm(1μW to 100mW) Maximum input power 300mW in average Linearity ±3%in only +10to +20dBm range Input connector N APC-3.5 N NC Dimensions and mass 34(W)×25(H)×98(L)mm,≤200g 34(W)×25(H)×87(L)mm,≤200g 34(W)×25(H)×98(L)mm,≤200g ·二极管功率传感器 Model MA4702A MA4704A MA4602A MA4604A Frequency range 10MHz to 18GHz 50MHz to 26.5GHz 100kHz to 5.5GHz 100kHz to 2GHz Nominal impedance 50Ω 75Ω Maximum VSWR 1.4(10to 30MHz) 1.15(30MHzto 4GHz) 1.2(4to 4GHz) 1.3(8to 18GHz) 1.15(50MHzto 4GHz) 1.2(4to 8GHz) 1.3(8to 18GHz) 1.54(18to 26.5GHz) 1.3(100to 300kHz) 1.15(300kHzto 3GHz) 1.15(300kHz to 3GHz) 1.2(3to 5.5GHz) 1.4(100to 300kHz) 1.2(300kHz to 2GHz) Measured power range -70 to -20dBm(0.1nW to 10μW) Maximum input power 200mW in average/peak,0 Vdc Linearity ±2%in only -30to -20dBm range Input connector N APC-3.5 N NC Dimensions and mass 34(W)×25(H)×98(L)mm,≤200g 34(W)×25(H)×87(L)mm,≤200g 34(W)×25(H)×98(L)mm,≤200g ·波导传感器用准毫米波段 Model MP737A MP738A MP712A[] MP713A[] MP714A[] Frequency range 17to 22GHz 21.7to 33GHz 18to 26.5GHz 26.5to 40GHz 33to 50GHz Maximum VSWR 1.6 1.5 1.6 1.5 Measured power range -30to +20dBm(1μW to 100mW) Maximum input power +22dBm(160mW) Dimensions and mass 52×103Lmm,≤450g 52×78Lmm,≤700g Required adapter type MA4002A MA4002B ·毫米波段 Model MP715A[] MP716A[] MP717A[] Frequency range 40to 60GHz 50to 75GHz 60to 90GHz Maximum VSWR 1.4 Measured power range -30to +20dBm(1μW to 100mW) Maximum input power +22dBm (160mW) Linearity error ±3%in only +10 to +20dBm range Dimensions and mass 52×78Lmm,≤700g(including cord) Required adapter type MA4002B 订货信息 Model/Order No. Name ML4803A   J0370A J0017 F0018 W0081AE W0081BE   MA4601A MA4603A MA4701A MA4703A MA4705A MA4602A MA4604A MA4702 MA4704A MA712A[] MA713A[] MA714A[] MA715A[] MA716A[] MA717A[] MP737A MP738A MA4001A MA4002A   MA4002B   J0364   J0365   MP47A   MP721D J0077 J0063 J0078 J0395 J0064A   J0064B   J0064C   J0366   J0367   J0368   J0632A   J0632B   J0633A J0633B J0633C J0633D J0633F J0633G J0633H J0369 B0183 B0184 B0185 B0186 J0370C J0370E J0370G MZ5003A J0371 J0008   Main frame Power Meter Standard accessories Sensor connecting cord,1.5m:1pc Power cord,,1.5m: 1pc Fuse,0.5A: 1pc ML4803A operation manual: 1copy ML4803A service mannual: 1copy Sensors Amorphous Power Sensor(coaxial-type) Amorphous Power Sensor(coaxial-type) Amorphous Power Sensor(coaxial-type) Amorphous Power Sensor(coaxial-type) Amorphous Power Sensor(coaxial-type) Diode Power Sensor(coaxial-type) Diode Power Sensor(coaxial-type) Diode Power Sensor(coaxial-type) Diode Power Sensor(coaxial-type) Waveguide Type Sensor^*1 Waveguide Type Sensor^*1 Waveguide Type Sensor^*1 Waveguide Type Sensor^*1 Waveguide Type Sensor^*1 Waveguide Type Sensor^*1 Waveguide Type Sensor^*1 Waveguide Type Sensor^*1 Optional accessories Range Calibrator(for indicator full-scale calibration) Sensor Adapter for quasi-millimeter wave(for MP712A/713A/737A/738A) Sensor Adapter for millimeter wave(for MP714A/715A/716A/717A) APC-3.5 to N conversion connector(required for MP4703A/4704A/4705A) NC-J.N-P conversio connector for sensitivity calibration(required forMA4603A/4604A) Attenuator for sensitivity calibration(30dB,required for MA4602A/4604A/4702A/4704A) Fixed Attenuator(20dB,N-type,2W,DC to 12.4Ghz) Fixed attenuator(20dB,N-type,2W,DC to 18Ghz) Fixed attenuator(20dB,N-type,2W,DC to 12.4Ghz) Fixed attenuator(20dB,N-type,2W,DC to 18Ghz) Fixed attenuator(20dB,N-type,2W,DC to 8.6Ghz) 7GHz band coaxial waveguide connector(5.8 to 8.2GHz,N-J to BRJ-7) 10GHz band coaxial waveguide connector(10.0 to 15.0GHz,N-J to BRJ-120) 10Ghz band coaxial waveguide connector(8.2 to 13.0GHz,N-J to BRJ-10) 18Ghz band coaxial waveguide connector(17.7 to 21.2GHz,SMA-J to FUBR180) 22Ghz band coaxial waveguide connector(18 to 26.5GHz,APC-3.5-J to UG-5971U) 30Ghz band coaxial waveguide connector(26.5 to 34GHz,APC-3.5-J to UG-5991U) 18Ghz band coaxial waveguide connector(17.7 to 22GHz,SMA-J to FUBR180) 26Ghz band coaxial waveguide connector(22 to 22GHz,K-J to FUBR260) Conversion connector(NC-J.BNC75-J) Conversion connector(NC-J.BNC75-P) Conversion connector(NC-J.BNC75-J) Conversion connector(NC-J.BNC75-P) Conversion connector(NC-J.SP3C-J) Conversion connector(NC-J.SP3C-P) Conversion connector(NC-J.SP3C-J) Conversion connector(NC-J.SP3C-P) Taper waveguide:WRJ-320(FUBR320)/WRJ-260(FUBR250) Rack mount kit-1(for one ML4803A) Rack mount kit-2(for two ML4803A) Carrying bag Protective front cover Sensor cord,2.5m(for extension) Sensor cord,5m(for extension) Sensor cord,10m(for extension) Battery Power Supply(for DC operation) DC power cord(for+7 to+12V power supply) GPIB cable,2m

查看和发表评论 推荐给朋友