|
|
Ametek JOFRA APC 压力校准仪 |
|
|
最近更新日期：2006-07-20 |
| 厂商名称： |
Ametek(阿美特克) |
| 商品名称： |
压力校准仪 |
| 商品型号： |
JOFRA APC |
| 简单信息： |
|
|
|
|
 |
Advanced
Pressure
Calibrator
JOFRA APC压力校准仪是全新设计的高精度数字压力校准仪，适合实验室和现场使用。APC校准仪可以作为表头单独使用，也可以构成6种不同校准系统，覆盖从真空到70Mpa的压力范围。它可以用来校准各种压力变送器，压力开关，压力表等仪表。
APC表头压力量程：
APC010C 真空到70kPa
APC030C 真空到200kPa
APC200C 真空到1.5Mpa
APC500G 0到3.5Mpa
APC01KG 0到7Mpa
APC03KG 0到20Mpa
APC05KG 0到35Mpa
APC10KG 0到70Mpa
真空准确度：±0.05%满量程
正压温度补偿：0-50
测量0-24mA准确度：±0.015%读数±2uA
压力单位：pa, psi, bar, kg/cm2, cmH2O等17种压力单位自动转换
介质：非腐蚀性气体和液体
压力接口： 1.5MPa以下1/8inNPT内螺纹
3.5MPa以上1/8inNPT外螺纹
过压：最大50%FS ， 20%以上屏幕显示OL报警
电池：1个9V电池最小20小时以上
头尺寸：200X82X54mm
表头重量：470g
JOFRA APC 系统 A
0 to 10 psi / 0.7 bar
0 to 30 psi / 2 bar
0 to 200 psi / 15 bar
This system includes the JOFRA APC calibrator together with one of the following pneumatic hand pumps: T-730 or T-740, depending on the chosen pressure range.
System A is an easy-to-use singlehand operated calibration system. No need for a flat surface to operate the system - just hold it in your hand.
The System A comes in an aluminum carrying case with cutouts for fittings, hose, and the complete assembled calibration unit - no time is required to assemble the unit every time you need it. The calibrator (indicator) can at any time be used separately for other pressure test tasks. A special quick connector between the pump and the indicator makes it possible to seperate the system in seconds.
JOFRA APC 系统 B
-12 to 200 psi / -0.850 to 15 bar
0 to 500 psi / 35 bar
This system includes the dual function pneumatic hand pump. With this pump you can calibrate both vacuum and pressure applications. It takes just a few seconds to switch between vacuum and pressure, just push one button (valve) on the T-910 handpump.
The system B comes in an aluminum carrying case with cutouts for fittings, hose and the complete assembled calibration unit - no time required to assemble the unit every time. The indicator and the pump are fitted with a special quick connector that makes it possible to seperate the system in seconds without any tool. This quick connector also makes it possible to use the assembled system with the indicator twisted to any angle.
JOFRA APC 系统 C
0 to 500 psi / 35 bar
0 to 1,000 psi / 70 bar
0 to 3,000 psi / 200 bar
0 to 5,000 psi / 350 bar
This system consists of an APC calibrator together with a hydraulic, high pressure hand pump T-620 or T-620H, which features an oil reservoir to prime the system.
System C is an easy-to-use single hand operated calibration system. No need for a flat surface (table) to operate the system. The system includes release valve and vernier valve for fine adjustment to enable safe and simple operation of the pump.
The system C comes in an aluminum carrying case with cutouts for fittings, hose, tube and the complete assembled calibration unit - no time adder to assemble the unit every time. Easy and fast connection between pump and calibrator makes it easy to use the pressure indicator separately for other pres-sure test tasks.
,b>JOFRA APC 系统 D
0 to 500 psi / 35 bar
0 to 1,000 psi / 70 bar
0 to 3,000 psi / 200 bar
0 to 5,000 psi / 350 bar
This system consists of APC calibrator together with a rugged, hydraulic, high pressure screw pump.
System D is an easy-to-use calibration system. Place the pump on a flat surface and turn the handle to generate pressure. You can adjust the indicator to fit the best viewing angle. The system includes a manifold for connection of the test device, a fine adjustment vernier valve (optional) and a reservoir for extra oil or water (optional).
The system D comes in an aluminum carrying case with cutouts for fittings, tube, and the complete assembled calibration unit - no time adder to assemble the unit every time. Easy and fast connection between pump and calibrator makes it easy to use the pressure calibrator separately for other pressure test tasks.
JOFRA APC 系统 E
0 to 1,000 psi / 70 bar
0 to 3,000 psi / 200 bar
0 to 5,000 psi / 350 bar
0 to 10,000 psi / 700 bar
This system consists of an APC calibrator together with a rugged, hydraulic, high pressure pump.
System E is an easy-to-use calibration system. The hydraulic pump makes it very easy to prime the system. You can adjust the indicator to fit the best viewing angle. The system includes a manifold for connection of two test devices and the fine adjustment vernier valve is standard.
The system E comes in an aluminum carrying case with cutouts for fittings, tube and the complete assembled calibration unit - no time adder to assemble the unit every time. Easy and fast connection between pump and calibrator makes it easy to use the pressure calibrator separately for other pressure test tasks.
JOFRA APC 系统 F
0 to 500 psi / 35 bar
0 to 1,000 psi / 70 bar
0 to 3,000 psi / 200 bar
0 to 5,000 psi / 350 bar
0 to 10,000 psi / 700 bar
System F is an easy-to-use calibration system. The hydraulic pump makes it very easy to prime the system. The pump contains 1.23 l / 75 in3 of liquid. The system includes a manifold for connection of two test devices and the fine adjustment vernier valve is standard.
The system F comes in an aluminum carrying case with cutouts for fittings, tube and the complete assembled calibration unit - no time adder to assemble the unit every time. Easy and fast connection between pump and calibrator makes it easy to use the pressure calibrator separately for other pressure test tasks. |
|
|
|
|
